• Soft antimicrobial silicone foam dressing, integrated with Nano silver and Polyhexamethylene biguanide (PHMB) provides highly effective antibacterial ability.
  • Absorbent dressing, good fluid retention helps prolong the use of gauze (up to 7 days). In addition, thanks to the silicone layer with light adhesion, it allows peeling and re-gluing many times during wound care without causing pain to the patient.

Còn hàng

Mua ngay Gọi điện xác nhận và giao hàng tận nơi

– HETIS SILVER SILICONE FOAM is a soft, antibacterial silicone foam dressing. The product is developed based on integrating Nano silver, Poly(hexamethylenebiguanide) hydrochloride (PHMB) into polyurethane foam (PU) providing highly effective antibacterial ability.

– The product has a thickness of 2.5 – 5mm (depending on the code), 3-layer structure:

  • The upper layer (in contact with the air) is a semi-permeable PU (polyurethane film) film that prevents water, prevents microorganisms from entering, but still allows water vapor to escape and exchange oxygen (MVTR (moisture vapour transmission rate) ≥ 1500 g/m2.24h).
  • The middle layer is a hydrophilic PU (polyurethane foam) foam layer with high absorbent capacity (11 – 18g fluid/g dressing) and retains fluid in the dressing to help limit the number of the dressing changes and at the same time maintain a suitable humid environment. suitable for the wound bed.
  • The lower layer (in direct contact with the wound and surrounding skin) is a perforated silicone layer (size 1.6 – 3.0mm) with low adhesion, gentle to the skin.

– HETIS SILVER SILICONE FOAM contains Nano Silver and highly active PHMB, which effectively antibacterial and prevents infections from external microorganisms (Effectively kills microorganisms up to 99.99% for gram-positive bacteria. and gram-negative bacteria).

– HETIS SILVER SILICONE FOAM releases a concentration of silver and PHMB gradually according to the amount of fluid absorbed from the wound bed. Maintains bactericidal ability and protects the wound from microorganisms during 7 days of treatment.

– HETIS SILVER SILICONE Foam is soft, elastic and flexible to help patients feel comfortable when using it, without pain and without sticking the dressing into the wound bed like conventional gauze.

– The product is sterilized, each piece in a separate sterile bag.

– The product is convenient, easy to use and manipulate.


HETIS SILVER SILICONE FOAM is indicated for wounds of moderate depth, moderate to heavy discharge, wounds with a high risk of infection such as:

  • Postoperative wound.
  • Injuries due to trauma.
  • Diabetic foot ulcers, foot ulcers, pressure ulcers, etc.
  • Skin grafting area.
  • Partial burns such as 2nd degree burns.

Indicated for external use only, local infection control with the advice of medical staff.

  • Do not use for dry wounds, little fluid, severe burns such as 3rd degree.
  • Do not use for patients allergic to silver and PHMB components contained in the dressing.
Instructions for Use
  • Clean the wound and surrounding areas with a specialized solution. If hydrogen peroxide is used to clean the wound, it should be rinsed with physiological saline before placing gauze on the wound.
  • Choose the dressing suitable for each location, size and shape of the wound.
  • Remove the dressing from the package, remove the bottom protective paper, then place the dressing on the center of the wound bed, make sure the PU Foam is in the center of the wound, continue to remove the rest of the paper, gently rub the silicone layer to stick to the surrounding skin. Finally, remove the upper PE film by peeling along the blue line between the dressing.
  • Regularly follow the condition of the dressing and the wound bed.
  • The frequency of dressing changes depends on the location, type, and the extent of the wound's discharge and as prescribed by the treating doctor (up to 7 days of gauze can be used).
Warning and Precautions
  • Do not use for dry wounds, little fluid, severe burns such as 3rd degree.
  • Do not use for patients allergic to silver and PHMB components contained in the dressing.

- No side effects were detected.

Products are available in different sizes, packed according to the following specifications:
Product code Thickness, mm Dimensions, mm Packing specification
SSF-100100-L 2.5 100x100 1 piece/pack, 20 packs/box
SSF-150150-L 2.5 150x150 1 piece/pack, 20 packs/box
SSF-200200-L 2.5 200x200 1 piece/pack, 10 packs/box
SSF-090150-L 2.5 90x150 1 piece/pack, 10 packs/box
SSF-090200-L 2.5 90x200 1 piece/pack, 10 packs/box
SSF-090250-L 2.5 90x250 1 piece/pack, 10 packs/box
SSF-100100-N 4.5 100x100 1 piece/pack, 10 packs/box
SSF-150150-N 4.5 150x150 1 piece/pack, 5 packs/box
SSF-200200-N 4.5 200x200 1 piece/pack, 5 packs/box
SSF-090150-N 4.5 90x150 1 piece/pack, 5 packs/box
SSF-090200-N 4.5 90x200 1 piece/pack, 5 packs/box
SSF-090250-N 4.5 90x250 1 piece/pack, 5 packs/box
Storage & Shelf life

- Temperature < 25°C.
- Direct transmission with sunlight.
- Shelf life 3 years from date of manufacture.

Sau khi đặt hàng thành công, Bộ phận Chăm sóc Khách hàng của Lavichem sẽ liên hệ với Quý khách để xác nhận và gửi email/sms về thông tin đơn hàng trong thời gian sớm nhất.
Hiện tại Lavichem hợp tác với Giao hàng tiết kiệm - đơn vị chuyển phát hàng đầu tại Việt Nam để thực hiện chuyển phát các sản phẩm tới Quý khách hàng.
Sau khi xác nhận thành công, đơn hàng sẽ được giao đến Quý khách trong khoảng thời gian sau đây:
  • Nội thành Hà Nội: Trong 24h kể từ lúc đặt hàng. 
  • Ở các tỉnh khách: Chuyển phát nhanh từ 1-4 ngày tùy khu vực. 

Mọi thông tin xin vui lòng liên hệ: Hotline 0964534499


Cam kết bán hàng tại LAVICHEM được xây dựng dựa trên uy tín và sứ mệnh mang đến những sản phẩm chất lượng, tốt nhất cho khách hàng.
  • Đang cập nhật
Thông tin khách hàng mà chúng tôi thu thập và do khách hàng đồng ý cung cấp gồm:
  1. Tên khách hàng
  2. Số điện thoại liên hệ
  3. Email (nếu có)
  4. Địa chỉ giao nhận


There are no reviews yet.

Be the first to review “HETIS SILVER SILICONE FOAM”



Hanoi Office: No 15, Lot N06A, Dich Vong urban area, Cau Giay, Hanoi
Tel : (+84) 24.626.544.99

HCM branch: No 20 7 street, Town 5, Binh Phuoc commune, Thu Duc district, Ho Chi Minh city
Tel : (+84) 28.5431.6656

Email: info@lavichem.vn

Website: hetis.vn

Delivery and Payment

- Free Shipping Nationwide
- Cash On Delivery (COD

Shopping Guide

Select the product you wish to order, and click the “Add to Cart” button. This will add the product to your shopping cart. You can add multiple items to your cart before moving onto the next step.

Customer Service
- Free Consultation 24/24
- Hotline: 0964.534.499 (Line 301)